Low Noise Regulator

Low Noise Regulator

The low-noise operation comes from the independent adjustment of each phase. A standard three-phase regulator may adjust all three phases together, so one adjustment affects the entire three-phase system. The mechanical movement is greater, which can also produce more operating noise.
Send Inquiry

It Solves Low Voltage at the Line End

Wenzhou Mingyue Electric Co., Ltd. manufactures this Low Noise Regulator for areas with weak power grids. Its low-noise operation is important, but its main function is to regulate very low voltage at the end of a power line.

 

In some areas, the voltage can drop to 270V or 280V during peak hours. A standard regulator has a minimum operating voltage of 304V. When the input voltage falls below this level, it stops regulating and the display goes off. Equipment connected downstream also stops working.

 

This unit can start regulating at 260V and maintain an output voltage of 380V.

product-800-800

Strong Materials for Long Service

The low-noise operation comes from the independent adjustment of each phase. A standard three-phase regulator may adjust all three phases together, so one adjustment affects the entire three-phase system. The mechanical movement is greater, which can also produce more operating noise.

This unit adjusts each phase independently. Only the motor of the phase that requires adjustment moves, while the other two phases remain unchanged. The adjustment movement is therefore smaller, which helps reduce operating noise. The Low Noise Regulator is suitable for power rooms near hospitals, laboratories, and residential areas where lower operating noise is required. The overall efficiency is above 96%. The unit does not add additional waveform distortion. The response time is less than 0.5 seconds, allowing it to respond quickly to load changes.

product-800-800

Made for Poor Grid Areas

 

The Low Noise Regulator is suitable for areas with poor grid quality. If the input voltage drops to 260V, a standard unit with a minimum operating voltage of 304V cannot regulate normally, while this unit can continue regulating. We work in Liushi Town, Yueqing City. Our plant covers 1,000 square meters. Our production complies with local environmental requirements, and we have no illegal discharge. We hold the required permits.

Before each unit leaves the factory, we test the voltage and current and inspect 100% of the products before packing. We provide a 5-year warranty. If goods are damaged during shipping, we repair or remake them at our factory and cover the freight cost.

The cabinet uses cold-rolled steel plate. The bottom has casters for easy movement. The panel has an ammeter, a voltmeter, and status indicator lights. Protection functions include overvoltage, undervoltage, phase loss, phase sequence, overload, short circuit, carbon brush limit, and delayed power-on protection. The cooling method is natural air cooling. The working temperature ranges from -5°C to +40°C, and the applicable altitude is up to 1,000 meters. The unit complies with the JB/T 10091 standard. The capacity and input voltage range can be customized according to your requirements.

one-stop solution

professional team

high quality

 

Product Parameters

 

Parameter

Value

Model

SVC(TNS)-120KVA Ultra-Low Voltage Type

Input Voltage

260V~456V AC

Output Voltage

380V Three-Phase

Voltage Accuracy

±1%

Adjustment Method

Three-Phase Independent Servo Motor, Carbon Brush Sliding

Efficiency

≥96%

Hot Tags: low noise regulator, China low noise regulator manufacturers, suppliers, factory, Ac Current Regulator, Ac Servo Stabilizer, Elent Stabilizer, High Voltage Adjustable Regulator, Low Noise Regulator, Voltage Stabilizer Coil

Send Inquiry

Send Inquiry